Skip to Content
Packard Pedal Boards
New
Shop
Custom Order Sheet
Reviews
Warranty & Return Policy
About
Contact
(0)
Cart (0)
Packard Pedal Boards
New
Shop
Custom Order Sheet
Reviews
Warranty & Return Policy
About
Contact
(0)
Cart (0)
New
Shop
Custom Order Sheet
Reviews
Warranty & Return Policy
About
Contact
Shop 12" Slanted Shell Pink
Slanted 12_24 Shell Pink 1.0.JPG Image 1 of 9
Slanted 12_24 Shell Pink 1.0.JPG
Slanted 12_24 Shell Pink 1.4.JPG Image 2 of 9
Slanted 12_24 Shell Pink 1.4.JPG
Slanted 12_24 Shell Pink 2.2.JPG Image 3 of 9
Slanted 12_24 Shell Pink 2.2.JPG
Slanted 12_24 Shell Pink 2.0.JPG Image 4 of 9
Slanted 12_24 Shell Pink 2.0.JPG
Slanted 12_24 Shell Pink 2.5.JPG Image 5 of 9
Slanted 12_24 Shell Pink 2.5.JPG
Slanted 12_24 Shell Pink 2.7.JPG Image 6 of 9
Slanted 12_24 Shell Pink 2.7.JPG
Slanted 12_24 Shell Pink 3.2.JPG Image 7 of 9
Slanted 12_24 Shell Pink 3.2.JPG
Slanted 12_24 Shell Pink 3.4.JPG Image 8 of 9
Slanted 12_24 Shell Pink 3.4.JPG
Slanted 12_24 Shell Pink 3.5.JPG Image 9 of 9
Slanted 12_24 Shell Pink 3.5.JPG
Slanted 12_24 Shell Pink 1.0.JPG
Slanted 12_24 Shell Pink 1.4.JPG
Slanted 12_24 Shell Pink 2.2.JPG
Slanted 12_24 Shell Pink 2.0.JPG
Slanted 12_24 Shell Pink 2.5.JPG
Slanted 12_24 Shell Pink 2.7.JPG
Slanted 12_24 Shell Pink 3.2.JPG
Slanted 12_24 Shell Pink 3.4.JPG
Slanted 12_24 Shell Pink 3.5.JPG

12" Slanted Shell Pink

from $250.00

A 12” deep Poplar slanted pedal board in either 18” or 24” length in a Shell Pink Satin Gloss 2K urethane finish.

Size:
Quantity:
Add To Cart

A 12” deep Poplar slanted pedal board in either 18” or 24” length in a Shell Pink Satin Gloss 2K urethane finish.

A 12” deep Poplar slanted pedal board in either 18” or 24” length in a Shell Pink Satin Gloss 2K urethane finish.

Made from 3/4” thick Poplar hardwood this pedal board is given multiple coats of a satin gloss 2K urethane in Shell Pink Satin Gloss. The perfect shade of pink to match your Tele Strat or Hello Kitty Fuzz pedal. This new handle less design has rounded corners and beveled edges. The 12” slanted model is large enough for two rows of pedals and full size foot pedals, and the 3/4” cable slot in the middle of the board makes it extremely easy for running cables and wires. The 2 3/4” tall slanted feet with non skid rubber feet on the bottom of the board are doweled and epoxy glued in place for maximum strength. The height of the feet allow plenty of room for mounting your power supply (One Spot, Voodoo Lab Etc.) and buffers on the bottom side of the board. Fully lined and padded gig bags are also available if extra protection for your board is needed for transporting it.

*These boards are made to order and usually take 2-3 weeks for shipment *

Products

B-Stock

Bags


Carry Handles

Company

About Us

Custom Order

Return Policy & Warranty

Contact

email

Reviews